How Do I Check My Transmission Fluid Level?

Posted in
Articles, Transmission Service

It’s no exaggeration to say that automatic transmissions run on oil, more properly called Automatic Transmission Fluid, or ATF.

Because of its dependence on ATF, low fluid level can have a disastrous effect on transmission operation — and even transmission life. That’s why it’s so important to keep an eye on the transmission fluid level.

Unfortunately, in recent years, many manufacturers have started to eliminate the transmission fluid dipstick. Called sealed units, these transmissions require a much more involved process to check fluid levels than in days gone by. The process often involves electronic testing devices, such as a computer scan tool. This puts checking the transmission fluid level beyond the capabilities of the average car owner.

If your car doesn’t have a dipstick, you should have your local transmission shop or dealership check the transmission fluid level at least a couple times a year, even if you don’t notice a problem with transmission operation. A good time to do this is while you’re having the engine oil changed, in the spring and fall.

But if your car has a transmission dipstick, you should check the transmission fluid level at least once a month. Your car’s owners manual should provide a detailed procedure for checking the transmission fluid level in your car.

If you don’t have an owners manual, here’s a basic procedure that’ll work on just about any car with a transmission dipstick.

WARNING: Checking the transmission fluid level requires working under the hood of your car with the engine running. This can be very dangerous if you aren’t careful. Watch out for moving components, such as fans, fan belts, pulleys, etc. If you aren’t comfortable with this procedure, always take your car to your local service station to have the transmission fluid checked.

  1. Make sure your car is on level ground.
    Car on level ground
  2. Start the engine.
    key on in park
  3. Bring the engine and transmission to normal operating temperature. The easiest way to do this is to check the fluid level right after driving the car for a while.
    Bring the engine to normal operating tempurature
  4. Hold your foot on the brake, and work the shifter slowly through the gears. Give the transmission a second or two in each gear range.
    Foot on the brake

    Shift the transmission
  5. Put the shifter all the way back into park.
    Put the transmission into Park
  6. Set the parking brake.
    Set the parking brake
  7. Carefully open the hood.
    open the car hood
  8. Find the transmission dipstick (your owners manual should show you where to look for the transmission dipstick):
    Rear wheel drive vehicles — the dipstick will usually be on the passenger’s side of the engine compartment, near the back of the engine.
    Locate the transmission dipstick
    Front wheel drive vehicles — the dipstick will usually be on the driver’s side of the vehicle, on either side of the transmission. 
    Remove the transmission dipstick
  9. Remove the dipstick, and wipe it off with a clean rag or paper towel.
    Clean the transmission dipstick
  10. Slide the dipstick all the way back down into the transmission fill tube.
    reinsert the transmission dipstick
  11. Pull the dipstick back out, and check the fluid level against the markings on the end of the dipstick.
    remove and check the transmission dipstick
  12. Add fluid as necessary.
    Add ATF to the automatic transmission

Always use the fluid recommended by the manufacturer. See the consumer information on fluid types to be sure you’re using the right fluid for your car.

If the transmission requires more than a quart, or is using fluid regularly, take your car in to have it checked for leaks.

And if you’re unsure of the procedure or where to find the transmission dipstick, check with your local ATRA member shop: They’ll be happy to show you where the dipstick is, and how to check the fluid level.

To find the ATRA Member shop near you, click the Shop Finder link.

If you have any questions you can e-mail them to ATRA's Technical Department through the Technical Services page or call 1-866-GO-4-ATRA (1-866-464-2872)

More Transmission Service articles available.